How to use hard disque system from another computer? - Step 1

As we know , we can not carry a disk system XP from one machine to another unless the two chipsets motherboards will be identical. More to be more clear, unless the trademark of both disk controllers for both cards will be identical.
If you exchange the disc from your PC to another disk from another machine, Windows will not start, it will start and after a few seconds, the system will display a blue screen and restart.
It is a protection introduced by Microsoft from version 5.1 of Windows NT, ie Windows XP. Before, it was feasible and without coercion.

But if you are really in need to carry a disk system XP from one machine to another, here's a little trick that will be very useful.

If you are really intended to carry your hard drive, including your operating system Windows XP on another machine, a number of solutions for you:

1. Find a machine with the same brand as your chipset,
2. Repair to use Windows driver disk drive of the motherboard target (next tutorial)
   Next tutorial: How to fix Windows simply but effectively?
3. Use a pilot universal use on all brands of motherboards without distinction.
   We will opt for the third option. With this method, Windows XP will ignore the mark of the controller and it will use a generic driver, standard. You can therefore carry your hard drive, including your operating system on any computer supporting Windows XP.

Now enter the heart of the matter,

Our goal is to change the pilot of the hard disk controller before removing the hard drive from your system in order to do this, follow these steps:

1. Entering the Device Manager.
   Plusieurs solutions s'offre à vous mais nous n'allons vous donner que deux les plus utilisés:
   1. Several options available to you but we will give you the two most common ones:
      .
      
      
      
   2. Click on the "Start" button then "settings" then "Control Panel"
      .
      
      l
      Double click on system
      
2. In the System Properties, click on "hardware" and then on device managers
   
   
   
   
3. Unroll the group Device "Controllers ATA / ATAPI IDE" by clicking on the + sign next to it
4. Click right mouse on one hard drive controllers in this group
5. Click on "Property"
   
   

Sorry for the system in French, I will change it into English later.